Basler Electric BE1-851E DNP3 Protocol - Manual (Page 24)

Binary Output Status Points and Control Relay Output Jacks
Table 5-2 lists both the Binary Output Status Points (Object 10) and the Control Relay Output Blocks
(Object 12). It is important to note that Binary Output Status Points are not included in Class 0.
Table 5-2. Binary Output Status Points and Control Relay Output Blocks
Binary Output Status Points:
Object Number: 10
Variations supported: 2
Request Function Codes supported: 1 (read)
Default Variation reported when variation 0 requested: 2 (Binary Output Status)
Control Relay Output Blocks
Object Number: 12
Variations supported: 1
Request Function Codes supported: 3(select), 4(operate), 5(direct operate), 6 (direct operate, noack)
Point
Index
Description Control Codes And Their Description
0 Hardware Output A State Latch On: Set Output x to state 1
Latch Off: Set Output x to state 0
Pulse On: Pulse output x to opposite of
current state then restore to
previous state ( pulsed output
is active 200 to 250 ms)
1 Hardware Output 1 State
2 Hardware Output 2 State
3 Hardware Output 3 State
4 Hardware Output 4 State
5 Hardware Output 5 State
6 Hardware Output 6 State
7 Hardware Output 7 State
8 All Hardware Outputs State
9 Hardware Output A Local Control Latch On: Set Hardware Output x to relay
logic
10 Hardware Output 1 Local Control
11 Hardware Output 2 Local Control
12 Hardware Output 3 Local Control
13 Hardware Output 4 Local Control
14 Hardware Output 5 Local Control
15 Hardware Output 6 Local Control
16 Hardware Output 7 Local Control
17 All Hardware Outputs Local Control
18 43 Selector Switch Status Latch On: Set x Selector Switch to 1
Latch Off: Set x Selector Switch to 0
Pulse On: Pulse x Selector Switch state
to opposite of the current state
then restore to previous state
(pulsed input is active 200 to
250 ms).
19 143 Selector Switch Status
20 243 Selector Switch Status
21 343 Selector Switch Status
22 Setting Group 0 Latch On: Select Group x to be Active
23 Setting Group 1
24 Setting Group 2
25 Setting Group 3
5-4 BE1-851E DNP Protocol 9289900792 Rev C