BUG-O Systems AGS-4000 - Manual (Page 28)

28
BRR-1180 BENT RIGID RAIL / CROSS SECTION / APPLICATION VIEW /
PARTS LIST
BENT RIGID RAIL (BRR) is a rigid section of high quality alloy bent for circumferential applications. A
machined gear rack is mounted on the rail, with which the pinion of the drive unit meshes, providing
positive drive in all directions. The wheels of the carriage travel in opposed grooves at either side of
the rail, securing the carriage to the rail. The rail can be ordered as a complete ring (BRR-1210-__)
or as individual sections (BRR-1180). When ordering, specify the work diameter (inside or outside),
method of mounting and if a complete ring is required. On larger diameters, rail can be “leapfrogged”
around the vessel to reduce the quantity needed. Maximum section length is 80" (2 m).
Note: Adjustable magnet support legs (ARM-2480),
shown above, are sold separately.
PARTS LIST
PART NO. DESCRIPTION QTY
ARR-1002 Rack 1
ARR-1027 Splicer Bar 2
ARR-1028 Carriage Bolt 2
ARR-1044-E Rail Extrusion 1
FAS-0375 Hex Hd Cap Scr 5/16-18 2
FAS-1370 Hex Nut 5/16-18 2
B
C
D
A 2.75" (70 mm)
B 4.0" (102 mm)
C 0.375" (9.5 mm)
D 0.875" (22 mm)
A
BRR CROSS SECTION VIEW
COMPLETE RING RAIL ASSEMBLIES
(1) BRR-1210-20 9-16 230-400 20 500
(2) BRR-1210-27 16-23 410-580 27 680
(3) BRR-1210-34 23-30 590-760 34 860
(4) BRR-1210-41 30-37 770-940 41 1040
(5) BRR-1210-48 37-44 950-1120 48 1220
* Ring Rails do not include attachments.
PART NO. INCHES MM INCHES MM
Work Diameters Ring
Inside Diameter
Ring Rails and Tube Size Ranges
BRR-1210-_ Work
Diameter
Ring ID