Comtech EF Data SLM-5650A Vipersat Parameter Editor - Manual (Page 41)

Chapter 2 - Using Parameter Editor 2-25
Vipersat
tion values are the highest achievable values as determined from the link
budgetary calculations performed for this site.
Figure 2-16 DPC Calibration dialog
These parameter fields are read only in this dialog, and reflect the input settings
made by the operator during modem configuration for DPC with either the Web
GUI or the CLI.
Home State
A SLM-5650A’s Home State consists of those parameters which provide a
known RF configuration that the unit will return to, either as the result of a
command by the VMS, or as it comes back on line from a reset or a power
cycle. These Home State settings are typically selected so that the SLM-5650A
goes to a configuration which is optimum for its function in the network.
Click on the Home State menu item to access the Enable check box
(figure 2-17).