Comtech EF Data SLM-5650A Vipersat Parameter Editor - Manual (Page 48)

Routing
2-32 SLM-5650A Parameter Editor User Guide
Figure 2-22 Open Shortest Path First dialog
With the exception of Topology (Mesh/Star), the parameters on this page are
used to configure the standard implementation of OSPF.
To activate the OSPF feature for this modem, click in the Enable OSPF check
box and set the parameter fields as described below. For the majority of
networks, the default settings are recommended.
Note: For systems that are already operating with OSPF, activation of any
parameter changes will result in a momentary stopping and re-starting of
the OSPF process.
Network Address
The Network Address parameter specifies the IP address of the network at this
site. This is the network to be monitored for OSPF changes.
Area
This parameter specifies the OSPF Area for this network. The default value is 0
(backbone). Range is 0-4294967295.
Retransmit Interval
The Retransmit Interval is the timer value for retransmitting Database
Description and Link State Request packets. The default value is 5 seconds.
Range is 1-65535.
NOTE