Comtech EF Data SLM-5650A Vipersat Parameter Editor - Manual (Page 42)

Vipersat
2-26 SLM-5650A Parameter Editor User Guide
Figure 2-17 Home State dialog
A superset of the Home State called the Modem Group Command (MGC) is
displayed here, containing every base modem parameter including Vipersat.
The Home State consists of both the modulator parameters and the demodulator
parameters. Click on the Mod and Demod menu items for configuration.
Mod
The transmit parameter settings for the Modulator home state are shown in
figure 2-18.
Note that the valid range for the Data Rate will vary depending on the Modula-
tion Type and Coding Rate.
When operating in Vipersat mode, the Coding Type must be set to Turbo and
Coding Rates of 1/2, 2/3, and 1/1 are not valid.