Continental Fireplaces CLHD45 - Manual (Page 45)

45
W415-0895 / C / 03.13.12
5.4
DO NOT CLEAN GLASS WHEN HOT! DO NOT USE
ABRASIVE CLEANERS TO CLEAN GLASS.
Buff lightly with a clean dry soft cloth to remove accumulated
dust or fi ngerprints. Clean both sides of the glass after the
fi rst 10 hours of operation with a recommended fi replace
glass cleaner. NOTE: Vinegar-based or ammonia-free
glass cleaners have generally demonstrated an ability
to provide a clean, streak free glass surface.
Thereafter
clean as required. If the glass is not kept clean permanent discoloration and / or blemishes may result.
Do not contact the inside surface of the glass with razor blades, steel wool or other metallic objects as a thin
layer of metal removed from the object may be deposited onto the coating which results in a discoloured stain
or scratch like mark. Such marks are not removed using the normal cleaning procedures given but require
specialized techniques.
Contact you local authorized dealer / distributor for complete cleaning instructions.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
!
WARNING
11.1 GLASS / DOOR REPLACEMENT
!
WARNING
DO NOT USE SUBSTITUTE MATERIALS.
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
CARE MUST BE TAKEN WHEN REMOVING AND DISPOSING OF ANY BROKEN DOOR GLASS OR
DAMAGED COMPONENTS. BE SURE TO VACUUM UP ANY BROKEN GLASS FROM INSIDE THE
APPLIANCE BEFORE OPERATION.
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
REMOVED, CRACKED, BROKEN OR SCRATCHED.
56.2
A. Place the door frame face down careful not to scratch the
paint.
B. Center the gasketed glass inside the door frame with the thick
side of the gasket facing up.
C. Bend the glass retainers located along the edge of the door
frame over the gasket holding the glass in place. Be careful
not to break the glass.
GLASS
RETAINERS
GASKET
DOOR
FRAME
GLASS
11.2 CARE OF GLASS