Datatek UTM - Manual (Page 46)

U T M U s e r ' s M a n u a l
01/18/08 46
8 S
AMPLE
C
ONFIGURATIONS
8.1.1 C ONFIGURATION #1
This sample configuration is a direct replacement of a SAMSL with a Universal Trunk.
UTM
SAM8
or
SAM16
Modem
Eliminator
The commands used to configure the Universal Trunk Module are as follows:
trunk type=hdlc phy=v35 modtype=samsl
All other commands are optional.
A SAM8 will not function properly above a 56Kbps clock rate. A SAM16 will function up to
128Kbps clock rate. A DT-4000 as a SAM16 replacement in this configuration will function up to a
clock rate of E1.