Datatek UTM - Manual (Page 53)

U T M U s e r ' s M a n u a l
01/18/08 53
9.3 I
NTERWORKING WITH AN
IP-DSU
AND
SWT/TRK-PQ/
TRK
-64/SAM
The Universal Trunk will also inter-work with an existing Datakit trunk module via an IP-DSU. This
allows the UTM to be used with a remote partner that is connected via an IP-DSU to an IP
infrastructure.
Consider the following diagram:
UTM
DK
Trunk
Node or MPC Node, MPC
or SAM
IP-DSU
IP
Network
10BaseT
HDLC
Configuration of the UTM is as follows:
trunk type=ipdsu modtype=<SWT | TRKT1 | TRK64> dest=<ipaddr>
local ipaddr=<ipaddr> submask=<mask>
gateway ipaddr=<ipaddr>
restore
Please note that it is assumed that the MAC address has been pre-configured in the unit.