Datatek UTM User Manual
Page 5
U T M U s e r ' s M a n u a l
01/18/08
5
SAM504 or Multi-Purpose Concentrator (MPC) to upgrade the device’s trunk options and
capabilities.
In order to support older controller releases, the UTM reports identifies itself to the BNS Control
Computer as either a TRK-T1, SAMSL, TRK64 , CPM-HS, or as an SWT module. Therefore, a
BNS generic software update is not required for the UTM.
The UTM can field upgraded. Upgrades are accomplished through two different I/O interfaces
accessed via its I/O board: Telnet or RS-232C.
The UTM houses an SNMP Version 1 agent and supports a large array of MIB variables. Trap,
Set and Get operations are available as well.
The UTM supports up to two TACACS+ RADIUS servers for login authentication. These are a
primary, and a secondary, although each is individually enabled. The TACACS+ support is for
either encrypted, or clear authorization. Encryption keys may contain spaces.