DFI EC200 Series - Manual (Page 125)

125
7
BIOS Setup
Third IDE Master and Third IDE Slave
When you enter the BIOS Setup Utility, the BIOS will auto detect the existing
IDE devices then displays the status of the detected devices. To confi gure an
IDE drive, move the cursor to a fi eld then press <Enter>.
Select the type
of device connected
to the system.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
 Select Screen
 Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Third IDE Master
Device :Not Detected
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T.
32Bit Data Transfer
Advanced
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
LBA/Large Mode
Auto
If the device supports LBA mode, the LBA mode will automatically be en-
abled, that is, if the device was not previuosly formatted with the LBA mode
disabled.
Disabled
Disables the LBA mode.
Block (Multi-Sector Transfer)
Auto
Data transfer from and to the device occurs multiple sectors at a time.
Disabled
Data transfer from and to the device occurs one sector at a time.