Supported software – DFI EC200 Series User Manual

Page 172

Advertising
background image

172

8

Supported Software

F6 Floppy Configuration Utility

This is used to create a fl oppy driver diskette needed when you installed Win-
dows

®

XP using the F6 installation method. This will allow you to install the oper-

ating system onto a hard drive when in AHCI mode.

1. Insert a blank fl oppy diskette.

2. Locate for the drivers in the CD then copy them to the fl oppy diskette. The
CD includes drivers for both 32-bit and 64-bit operating systems. The path
to the drivers are shown below.

32-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6fl py32

64-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6fl py64

Advertising
This manual is related to the following products: