Chapter 4 – DFI BT968 User Manual
Page 35
www.dfi .com
Chapter 4 BIOS Setup
35
Chapter 4
CPU Configuration
This section is used to configure the CPU. It will also display the detection of CPU information.
Intel Virtualization Technology
When this field is set to enabled, the VMM can utilize the additional hardware capabili-
ties provided by Vanderpool Technology.
When enabled, a VMM
can utilize the additional
hardware capabilities
provided by Vanderpool
Technology.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Advanced
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit
30673
31e
1918 MHz
Supported
4
Supported
24 KB x4
32 KB x4
1024 KB x2
[Enabled]
CPU Confi guration
Intel(R) Atom(TM) CPU E3845 @ 1.91GHz
CPU Signature
Microcode Patch
CPU Speed
64-bit
Processor Cores
Intel VT-x Technology
L1 Data Cache
L1 Code Cache
L2 Cache
Intel Virtualization Technology
SATA Configuration
This section is used to configure the settings of SATA device.
Enable/Disable Serial
ATA
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
SATA Confi guration
Serial-ATA (SATA)
SATA Mode
Serial-ATA Port 0
Serial-ATA Port 1
SATA Port0
Not Present
SATA Port1
Not Present
Advanced
Serial ATA Port 0 and 1
This field is used to enable or disable the Serial ATA port 0 and 1.
[Enabled]
[AHCI Mode]
[Enabled]
[Enabled]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit