DFI BT968 - Manual (Page 43)

www.dfi .com Chapter 4 BIOS Setup
43
Chapter 4
Memory Configuration
This section pnly displays the parameters of memory configuration.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Memory Information
Total Memory
Memory Slot1
Memory Slot2
4096 MB (LPDDR3)
4096 MB (LPDDR3)
Not Present
Chipset


Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Reset
Exit
Azalia HD Audio Options
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
South Bridge
This field is used to configure the parameters of the South Bridge.
 Azalia HD Audio
 PCI Express Confi guration
Restore AC Power Loss
Intel(R) I210 Controller [Power Off]
[Enabled]
Restore AC Power Loss
Power Off
When power returns after an AC power failure, the system’s power is off. You must
press the Power button to power-on the system.
Power On
When power returns after an AC power failure, the system will automatically power-
on.
Last State
When power returns after an AC power failure, the system will return to the state
where you left off before power failure occurs. If the system’s power is off when AC
power failure occurs, it will remain off when power returns. If the system’s power is
on when AC power failure occurs, the system will power-on when power returns.
Intel(R) I210 Controller
Enable the Intel(R) I210 ethernet controller.