DFI BT968 - Manual (Page 37)

www.dfi .com Chapter 4 BIOS Setup
37
Chapter 4
CSM Configuration
This section configures the CSM settings.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Compatibility Support Module Confi guration
CSM Support
CSM16 Module Version
Boot option fi lter
Option ROM execution order
Network
Storage
Video
Other PCI devices
Advanced
[Enabled]
07.71
[UEFI and Legacy]
[Do not launch]
[Legacy only]
[Legacy only]
[UEFI only]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Enable/Disable CSM
support
CSM Support
This field is used to enable or disable the CSM support.
Boot option filter
This option controls Legacy/UEFI ROMs priority.
Network
This field controls the execution of UEFI and Legacy PXE OpROM.
Storage
This field controls the execution of UEFI and Legacy Storage OpROM.
Video
This field controls the execution of UEFI and Legacy Video OpROM.
Other PCI devices
This field determines OpROM execution policy for devices other than network, storage
or video.
Trusted Computing
This section configures settings relevant to Trusted Computing innovations.
Enables or Disables
BIOS support for security
device. O.S. will not show
Security Device. TCG
EFI protocol and INT1A
interface will not be
available.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Confi guration
Security Device Support
Current Status Information
SUPPORT TURNED OFF
Advanced
Security Device Support
Enables or Disables the BIOS support for the security device. O.S. will not show the
security device. TCG EFI protocol and TNT1A interface will not be available.
[Disable]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit