DFI HM920-HM86 - Manual (Page 39)

www.dfi .com Chapter 4 BIOS Setup
39
Chapter 4
Device reset time-out
Select the USB mass storage device start unit command timeout.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. “Auto” uses default value: for a Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor.
PCH-FW Configuration
This section displays the parameters of Management Engine Technology.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
ME FW Version
ME Firmware Mode
ME Firmware Type
ME Firmware SKU
Advanced
9.0.10.1372
Normal Mode
Full Sku Firmware
5MB


Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit