DFI HM920-HM86 - Manual (Page 60)

www.dfi .com Chapter 5 Supported Software
60
Chapter 5
7. Select the device driver
you want to install for this
hardware and then click
"Next."
6. Insert the installation disk
and make sure the selected
drive is correct.
(For 32-bit, the fi le name is “e1d5132.inf”.)
8. Check the software you
are installing, Then, click
"Continue Anyway" to start
the installation.
9. Click "Finish" to close the wizard.
10. After completing the instal-
lation, the Network adapters
"Intel(R) Ethernet Connection
I217LM" will appear on the
computer management list.