DFI BT160 - Manual (Page 30)

www.dfi .com
30
Chapter 2 Hardware Installation
Chapter 2
DFI Proprietary Extension Bus
Pins Pin Assignment Pins Pin Assignment
A1 GND B1 +12V
A2 +12V B2 +12V
A3 +12V B3 +12V
A4 GND B4 GND
A5 +5V B5 SMB_CLK
A6 +5V B6 SMB_DATA
A7 +5V B7 GND
A8 +5V B8 +3V3
A9 +3V3 B9 NC
A10 +3V3 B10 +3VDU
A11 RESET- B11 PCIE_WAKE-
A12 GND B12 PME-
A13 CLK+ B13 GND
A14 CLK- B14 TX+
A15 GND B15 TX-
A16 RX+ B16 GND
A17 RX- B17 NC
A18 GND B18 GND
Expansion Slots
Mini PCIe Slot
The Mini PCIe socket is used to install a half size Mini PCIe card. Mini PCIe card is a small
form factor PCI card with the same signal protocol, electrical definitions, and configuration
definitions as the conventional PCI. It supports PCIe and USB signals.
PCI Express x1 Slot
Install PCI Express cards such as network cards or other cards that comply to the PCI Express
specifications into the PCI Express x1 slot.
DFI Proprietary Extension Bus
The DFI Proprietary Extension Bus gold finger is used for customized expansion (PCI or Mini
PCIe) via a riser card.
PCI Express x1
Mini PCI Express
DFI Proprietary
Extension Bus