DFI BT160 - Manual (Page 42)

www.dfi .com
42
Chapter 3 BIOS Setup
Chapter 3
Intel(R) I210 Gigabit Network Connection - 00:01:29:51...
This section is used to configure the parameters of the Gigabit Ethernet device at UEFI mode.
Confi gure Boot Protocol,
Wake on LAN, Link
Speed, and VLAN.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
PORT CONFIGURATION MENU
 NIC Confi guration
Blink LEDs
PORT CONFIGURATION INFORMATION
UEFI Driver:
Adapter PBA:
Chip Type
PCI Device ID
Bus: Device: Function:
Link Status
MAC Address
Virtual MAC Address
Advanced
0
Intel(R) PRO/1000 5.5.19
000300-000
Intel i210
1533
01:00:00
[Disconnected]
00:01:29:51:7B:40
00:01:29:51:7B:40
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Blink LEDs
Identify the physical network port by blinking the associated LED.
Link Status
This field indicates the link status of the network device.
Virtual MAC Address
This field indicates programmatically assignable MAC address for the network port.
Security Configuration
This section only displays the Intel(R) TXE configuration and version.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Intel(R) TXE Confi guration
TXE FW Version
TXE HMRFPO
Advanced
01.01.00.1089
[Disabled]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit