Gasboy 1000 Series Fuel Management System Installation - Manual (Page 5)

MDE-4344A Series 1000 Fuel Management System Installation Manual · November 2008 Page 1
Purpose Introduction
1 – Introduction
Purpose
The Gasboy ® Series 1000 Installation Manual is provided to assist you in installing your Series
1000 System. This manual should be supplied to the electrician prior to the installation of
conduit and wiring to ensure your Series 1000 System is installed properly. Faulty installations
are the major cause of system malfunctions. The Series 1000 system must be installed exactly
as described in this manual to ensure its reliability and proper operation.
Note: Gasboy provides a toll-free number for customers and installers having questions
pertaining to the installation: 1-800-444-5529.
Abbreviations and Acronyms
Term Description
CFN Cash Flow Network
CRT Cathode Ray Tube
EIA Electronics Industrial Association
LCD Liquid Crystal Display
PCB Printer Circuit Board
PIN Personal Identification Number
SPS Shared Printer Switch
UL ® Underwriters Laboratories
Hardware Description
The Gasboy Series 1000 Fuel Management System is a microprocessor-based fuel control and
data acquisition system. It is available in three types:
• Card - where access to the system is controlled by magnetic or optical cards.
• Cardless - where access to the system is attained by entering a valid vehicle number.
• FleetKey - where access to the system is controlled by encoded data keys.
The system is totally self-contained in an attractive, weatherized cabinet and pedestal
assembly. The system is Underwriter’s Laboratories (UL) and FCC-Listed, and is designed to
be located on the fueling island convenient to the user.