Sps cabling – Gasboy 1000 Series Fuel Management System Installation User Manual
Page 64
Advertising
Communication Wiring
SPS Cabling
Page 60 MDE-4344A Series 1000 Fuel Management System Installation Manual · November 2008
Figure 5-13: RS-232 Wiring
Note: The SPS TS-201 is being used with factory default settings: JP1 and JP3 jumpered, JP2
and JP4 not jumpered. The SPS must be connected to Port 1 of the FleetKey/Series
1000 because it is the only port that supports direct printout or logger functions.
SPS Cabling
Note: All Gasboy-supplied cables are eight feet long.
Figure 5-14: SPS Printer Cable - C05166
Advertising