Accessing a target group – Guntermann & Drunck DVICenter DP16 Configuration and Operation User Manual
Page 66
Target modules
58 · G&D DVICenter
9. Repeat steps 7 and 8 to change the access rights to further target modules.
10.Press
F2
to save your settings.
Accessing a target group
How to change the user account’s target group access right:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F11
to call the
Configuration
menu.
3. If you want to change this right of a user account, select the
User
entry.
For changing the right of a user group, select the
Usergroup
entry.
4. Press
Enter
.
5. Select the user account or the user group whose target group access rights you
want to change and press
F5
.
6. Select the
Target group access rights
entry and press
Enter
.
7. Select the desired target group whose access rights you want to change.
8. Press
F8
to select one of the listed options:
9. Repeat steps 7 and 8 to change the access rights to further target modules.
10.Press
F2
to save your settings.
ADVICE:
Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.
no:
denies access to the computer connected to the group’s target modules
view:
enables to view the screen content of the computer connected to the
group’s target modules
full:
full access to the computer connected to the group’s target modules
NOTE:
The View mode enables you to access the monitor image of the target
computer. Inputs, however, are not possible.