HiTi CS-200e - Manual (Page 15)

* IT’S IMPORTANT TO STAY COVERED BY YOUR WARRANTY!! *
13
3.1 General warranty information notice announcement
Chapter3. Printer maintenance
HiTi CS card printer is professional designed to provide you a long term service duty with minimum regular
maintenance required. Therefore please do comply with the instructions given in below to ensure your
printer unit is covered by warranty condition.
HiTi CS card printer accepts no any other liability what so ever where it has been any single failure to
perform required servicing and maintenance job duties on the printer. It is common to know that the print
head is an extremely sensitive as well as a wearing and tearing component. Therefore the life expectancy is
heavily depending on the presence of solids, dust or liquids in the environment, either on the print head or
cards. Every operating user must take all necessary precautions to use clean cards in the printer unit. The
frequency and quality of the servicing and maintenance job duties will not only extend the print head’s life
expectancy, but also maintain the output printed quality. It is very important to all users must comply with
the servicing and maintenance instructions which described within this chapter.
Use of non HiTi original consumables/ribbons may affect the quality and reliability of print job, low quality
printed output and may also affect the printer’s physical functions. The manufacturer’s warranty does not
cover any physical damages, quality problems and print head warranty by using non HiTi original
consumables/ribbons.
All the manufacturer’s warranty conditions are subject to strict adherence to the regular routine
servicing and maintenance instructions, and also printer cleaning cycles.
Any failure of the following required servicing and maintenance job duties mentioned in this
chapter may void the print head warranty.
English
HiTi CS-200e & CS-220e user manual