IDK OPF-H1000D - Manual (Page 20)

OPF-TH1000D/OPF-RH1000D User’s Guide
20
6 Basic operation
6.1 Menu operation buttons
Setting input and output of the transmitter using the menu operation buttons.
To use menu operation buttons:
Select the menu number first and then select the setting number.
Use a thin stick to press buttons.
Notes:
● If no operation is performed for 10 seconds in step 5, the procedure will be returned to step 2.
● If no operation is performed for 60 seconds in each step, the segment display is turned off.
■ Procedure
1
Press the “SET” button. The
segment display lights.
2
Select the menu number using “＋”
and “－” buttons.
3
Press the “SET” button to apply the
menu number.
4
Select the setting number using ”＋”
and “－” buttons.
5
Press the “SET” button to apply the
setting.
The display of step 2 is displayed
again.
If no operation is performed for 10
seconds in step 5, the procedure
will be returned to step 2.
Using menu operation keys
POWER STATUS HDCP
Tx
KEY LOCK
－ ＋ SET
1, 3
2
Selecting menu
number
Setting
POWER STATUS HDCP
Tx
KEY LOCK
－ ＋ SET
5
4