IDK OPF-H1000D - Manual (Page 24)

OPF-TH1000D/OPF-RH1000D User’s Guide
24
6.4.2 Setting receiver
Setting receiver
If devices other than devices on the figure above, settings of those devices will not be affected.
1
Connect devices using cables.
2
Set DIP SW1 to “ON” (setting mode).
3
Turn on the receiver.
4
Set the receiver using commands.
【See 8 Command】
5
Turn off the receiver.
6
Set DIP SW1 to “OFF” (communication mode).
RS
-232
C
FG
DC
5 V
3 A
POWER STATUS HDCP
HDMI OUTPUT
Rx
OPTICAL DAISYCHAIN Rx for HDMI OPF-RH1000D RX
OPTICAL
TX
SIGNAL
DIP SW
CLASS 1 LASER PRODUCT
クラス 1 レーザ製品
Laptop
Set DIP SW1
to “ON”.