2 setting command, Gpm / @spm, Acquiring version information – IDK OPF-H1000D User Manual
Page 42: Setting command, Hot plug mask off setting (only receiver)
OPF-TH1000D/OPF-RH1000D User’s Guide
42
8.3.2 Setting command
@GPM / @SPM
Setting time for ignoring video output request signals: Hot Plug mask off setting
(only receiver)
Function
Acquisition
Setting
Format
@GPM
@SPM, time
Return value
format
@GPM, time
@SPM, time
Parameter
time: If the request signals are repeated in a short cycle, video may not be output. This
problem can be solved by setting the ignoring time.
0 = OFF [Default]
2 to 15 = 2 to 15 seconds
Example
@GPM
@GPM,0
Acquires the current setting status.
The setting is OFF.
@SPM,2
@SPM,2
Sets the ignoring time to 2 seconds.
The setting has been changed to 2 seconds.
Related info.
－
@GIV
Acquiring version information
Function
Acquisition
Format
@GIV
Return value
format
@GIV, id, ver
Parameter
id: model name
ver: firmware version
Example
@GIV
@GIV,OPF-RH1000D ,1.00
Acquires the version information of the firmware.
The firmware version of the OPF-RH1000D is
ver.1.00. (for transmitter, the firmware version of
the “OPF-TH1000D” will be returned.)
Related info.