IDK OPF-H1000D - Manual (Page 35)

OPF-TH1000D/OPF-RH1000D User’s Guide
35
7.3.2 [C55] Forced color conversion output
You can set the color space to be sent to the sink device.
Normally the sink device automatically select a proper color space for display according to the color space of
input video. However, if a sink device cannot select a color space for some reason, use this menu in order to
set the color space.
Setting value
rgb: RGB output
422: YCbCr422 output
444: YCbCr444 output
d: DVI output
oFF: automatic [Default]
7.3.3 [C90] RS-232C communication mode
Set the RS-232C communication mode in order to control the transmitter using commands.
【See 8 Command】
Setting value
00: communication mode [Default]
01: setting mode (9600 bps)