9 [f34] dolby truehd audio, 10 [f36] audio channel, F34] dolby truehd audio – IDK OPF-H1000D User Manual
Page 32: F36] audio channel, Dolby truehd audio, Audio channel
OPF-TH1000D/OPF-RH1000D User’s Guide
32
7.2.9 [F34] Dolby TrueHD Audio
You can set the maximum sampling frequency of Dolby TrueHD Audio that is output from the source device.
Setting value
44: 44.1 kHz
48: 48 kHz
88: 88.2 kHz
96: 96 kHz
176: 176.4 kHz
192: 192 kHz
oFF: OFF [Default]
Note: For LCD monitors and the like, some audio formats are not supported. Select the audio format and
sampling frequency that are supported by the connected devices.
7.2.10 [F36] Audio channel
You can set the number of channels to the audio of multi-channel output that is from the source device.
Setting value
02: 2 channels [Default]
03: 3 channels (2.1channels)
06: 6 channels (5.1channels)
08: 8 channels (7.1channels)
■ The number of channels and speaker configuration
RL
RLC
RRC
RR
FR
ＦＣ
FL
LFE
FL : Front Left
FC : Front Center
FR : Front Right
RL : Rear Left
RR : Rear Right
RLC : Rear Left Center
RRC : Rear Right Center
LFE : Low Frequency Effect
Number of speakers
FL/FR
LFE
FC
RL/RR
RLC/RRC
2 (2 channels)
ON
OFF
OFF
OFF
OFF
3 (2.1 channels)
ON
ON
OFF
OFF
OFF
6 (5.1 channels)
ON
ON
ON
ON
OFF
8 (7.1 channels)
ON
ON
ON
ON
ON
The number of channels and speaker configuration