IDK OPF-H1000D - Manual (Page 44)

OPF-TH1000D/OPF-RH1000D User’s Guide
44
@GOS Acquiring output status
Function Acquisition
Format @GOS, mode
Return value
format
@GOS, mode (, status1, status2, status3, status4, status5, status6, status7)
Parameter mode: selecting item
0 = selecting all items (information of status1 to status7)
1 to 7 = selecting items from status1 to status7
status1: Deep Color of the sink device
8bit/10bit/12bit/16bit/－
status2: HDMI and audio of the sink device
HDMI = HDMI/DVI/－
Audio = PCM/Audio Compression supported/－
status3: Color space of the sink device
RGB/YCbCr444/YCbCr422/－
status4: status of HDCP authorization with connected monitor
#0 = no HDCP
#1 to #3 = being authorized
#4 and #5 = authorization ends normally
#－ = any monitor is connected
status5: color space
RGB/YCbCr444/YCbCr422/－
status6: HDCP of the sink device
HDCP supported/HDCP not supported/－
status7: Hot plug Detect
on/off
Example @GOS,2
@GOS,2,HDMI PCM
Acquires the output status of status2.
The output status of status2 is HDMI and PCM.
Related info. 7.4.2 [L50] Displaying information about output