JLCooper FaderMaster Pro MIDI for OS X - Manual (Page 15)

Parameters Common to Faders and Buttons
Channel Messages
MIDI Channel Messages may be assigned to any FaderMaster control. First select a
control in a Setup window then click on the Channel Message Tab in the Inspector.
MIDI Channel messages are either two or three bytes in length. If you choose a three
byte message from the MIDI Message Type popup, you will be able to set both the
MIDI Channel and the Parameter #. If you choose a two byte message, there will be no
Parameter #.
Minimum and Maximum Value lets you limit the values that a control can send. In the
case of faders, moving the fader through its full range will send values between the
Minimum Value and the Maximum Value.
FaderMaster Pro MIDI Software for OS X™
13