JLCooper FaderMaster Pro MIDI for OS X - Manual (Page 8)

The User Interface
The FaderMaster software’s user interface consists of two windows. The Setup window
shows a graphical representation of the FaderMaster hardware, along with some other
useful controls. The Inspector window is where all the programming takes place.
The right side of the Setup window corresponds to the programmable fader and button
controls on the FaderMaster Hardware. There are also a couple of “1/4 inch jacks”
representing the programmable foot pedal and foot switch.
The upper left displays the current bank number and bank name, if one has been
assigned. Below that are buttons for selecting any of the twenty programable banks.
Choosing a bank with one of these buttons will change the bank both on-screen and on
the FaderMaster hardware. Likewise, pressing the Up or Down buttons on the
hardware will change the on-screen bank.
To the right of the bank buttons are four buttons that control the transfer of data between
the FaderMaster and the software. Send Bank sends the current bank’s assignments
from the software to the FaderMaster. Send All Banks sends all twenty banks from the
software to the hardware.
FaderMaster Pro MIDI Software for OS X™
6