Measurement Computing ADLIB WIN - Manual (Page 13)

Chapter 3 Configuration, Capabilities and Initialization Files 2-1
2. INSTALLATION
2.1 INSTALLATION FROM WINDOWS for PCI CARD SUPPORT
If you are installing ADLIB WDM for a PCI based product, follow the installation instructions on the CD
provided with the PCI board.
If you are using ADLIB WDM with Windows NT 4.0, you must do the following:
1. Manually copy the “aPcixx.sys” file from the ADAC CD’s NT4 directory to your
\WinNT\system32\drivers directory.
2. From the ADAC CD’s NT4 directory, run the “aPci55xx.reg” file by double clicking on it, this will
update your registry to look for ADAC PCI boards.
3. Reboot your PC to load the ADAC drivers.