Measurement Computing ADLIB WIN - Manual (Page 190)

Chapter 44 Board Driver Error Codes 31-8
DRVERR_DIGITALOUTPUT_NOTSUPPORTED = -405030 The requested operation is
not supported.
DRVERR_BOARD_READYBIT_TIMEOUT = -405031 The boards ready bit flag
indicator is not setting.
DRVERR_SETFILTERTYPE_NOTSUPPORTED = -405032 Filter types are not supported.
DRVERR_SETERRONTRIGOVERRUN_NOTSUPPORTED = -405033 ErrOnTrigOverrun is not
supported.
DRVERR_SETBUFFMSGHANDLERPARAMS_NOTSUPPORTED - -405034 User PostMessage
parameters are not
supported
DRVERR_GETACTUALCLOCKRATE_NOTSUPPORTED = -405035 The requested operation is
not supported or the clock
source is unknown such as
ext.clocking.
DRVERR_SETDATAOFFSETLIST_NOTSUPPORTED = -405036 The requested operation is
not supported.
DRVERR_SETTRIGGEROUTPUT_NOTSUPPORTED = -405037 The requested operation is
not supported.
DRVERR_SETCLOCKOUTPUT_NOTSUPPORTED = -405038 The requested operation is
not supported.
DRVERR_SETCTRMODE_NOTSUPPORTED = -405039 The requested operation is
not supported.
DRVERR_COUNTERIN_NOTSUPPORTED = -405040 The requested operation is
not supported.
DRVERR_COUNTEROUT_NOTSUPPORTED = -405041 The requested operation is
not supported.
DRVERR_SETINPUTCONFIGLIST_NOTSUPPORTED = -405042 The requested operation is
not supported.
DRVERR_GETBOARDERROR_NOTSUPPORTED = -405043 The requested operation is
not supported.
DRVERR_SETPACKEDDATA_NOTSUPPORTED = -405044 The requested operation is
not supported.
DRVERR_BOARD_FNEBIT_TIMEOUT = -405045 The boards FNE bit is not
setting after a conversion has
been initiated.