Measurement Computing ADLIB WIN - Manual (Page 170)

Chapter 43 ADLIB Error Codes 30-20
INTERRUPTS
ALERR_IRQ_LEVELS_UNSUPPORTED -5000 IRQ Levels are not supported.
ALERR_IRQ_LEVEL -5001 Specified IRQ Level option is not valid.
ALERR_IRQ_INUSE -5002 Specified IRQ Level is already in use.
ALERR_SETIRQSTATUS_FLAG -5003 The status flag specified is
unknown.
ALERR_SETIRQSTATUS_OWNER -5004 Invalid IRQ owner setting status flags.
SIGNAL PATHS
ALERR_SIGNALPATH_UNSUPPORTED -5100 Signal Paths are not supported.
ALERR_SIGNALPATH -5101 Specified Signal Path option is not valid.
DATA TRANSFER METHOD
ALERR_DTM_UNSUPPORTED -5200 DTM Methods are not supported.
ALERR_DTM -5201 Specified DTM Method option is not valid.
CYCLE MODE
ALERR_CM_UNSUPPORTED -5300 CM Methods are not supported.
ALERR_CM -5301 Specified CM option is not valid.
ALERR_CM_NUMBUFFERS -5302 Selected CM option is not valid for the
number of buffers specified.
DATA SPAN
ALERR_DATASPAN_UNSUPPORTED -5400 Data Span is not supported.
ALERR_DATASPAN -5401 Specified Data Span option is not valid.