Measurement Computing PCI-DAS6013 User Manual
Page 37
PCI-DAS6013 and PCI-DAS6014 User's Guide
Specifications
37
Configurable AUXIN<5:0>, AUXOUT<2:0> external trigger/clocks
The PCI-DAS6013 and PCI-DAS6014 provide nine user-configurable trigger/clock pins available at the
100-pin I/O connector. Of these, six are configurable as inputs while three are configurable as outputs.
AUXIN<5:0> sources (software
selectable)
A/D CONVERT:
External ADC convert strobe
A/D TIMEBASE IN:
External ADC pacer timebase
A/D START TRIGGER:
ADC Start Trigger
A/D STOP TRIGGER:
ADC Stop Trigger
A/D PACER GATE:
External ADC gate
D/A START TRIGGER:
DAC trigger/gate
D/A UPDATE:
DAC update strobe
D/A TIMEBASE IN:
External DAC pacer timebase
AUXOUT<2:0> sources
(software selectable)
STARTSCAN:
A pulse indicating start of conversion
SSH:
Active signal that terminates at the start of the
last conversion in a scan.
A/D STOP:
Indicates end of scan
A/D CONVERT:
ADC convert pulse
SCANCLK:
Delayed version of ADC convert
CTR1 CLK
CTR1 clock source
D/A UPDATE:
D/A update pulse
CTR2 CLK:
CTR2 clock source
A/D START TRIGGER:
ADC Start Trigger Out
A/D STOP TRIGGER:
ADC Stop Trigger Out
D/A START TRIGGER:
DAC Start Trigger Out
Default selections
AUXIN0:
A/D CONVERT
AUXIN1:
A/D START TRIGGER
AUXIN2:
A/D STOP TRIGGER
AUXIN3:
D/A UPDATE
AUXIN4:
D/A START TRIGGER
AUXIN5:
A/D PACER GATE
AUXOUT0:
D/A UPDATE
AUXOUT1:
A/D CONVERT
AUXOUT2:
SCANCLK
Compatibility
5V/TTL
Edge-sensitive polarity
Rising/falling, software selectable
Level-sensitive polarity
Active high/active low, software selectable
Minimum input pulse width
37.5 ns