Metz MECABLITZ 36 C-2 - Manual (Page 90)

90
Displays on the mecablitz
Indicazioni sul mecablitz
Indicaciones en el mecablitz
4.2 Correct exposure indication on the mecablitz 36 C-2
The “o.k.” correct exposure confirmation briefly lights up on
the mecablitz when the picture was correctly exposed in the
auto flash mode.
If “o.k.” is not indicated after an exposure, then this means
that the picture was underexposed. The shot will then have to
be repeated: Set the next smaller f-number (e.g. f/4 instead
of f/8) on the mecablitz and the camera, or reduce the
distance to the subject or the reflecting surface (e.g. when
bouncing the flash). Please observe the maximum flash
range indicated on the aperture calculator of the mecablitz.
The manual firing button on the mecablitz 36 C-2 can
be used in the auto flash mode to establish prior to
shooting whether or not the flash will be sufficient for
the selected auto working aperture. When firing a test
flash point the flash unit in the same direction as for the
subsequent shot.
☞