Metz MECABLITZ 36 C-2 - Manual (Page 98)

98
Auto flash mode
Modo flash automatico
Funcionamiento automático del flash
• The sensor must be pointing at the subject irrespective of
the reflector setting. It only measures the light during the
firing of flashes by the mecablitz.
Up to three colour-coded auto working apertures (yellow -
green - red) are available, depending on the given ISO film
speed. The auto working aperture is selected with the aper-
ture selector (yellow - green - red) on the mecablitz and
depends on the camera-to-subject distance.
The aperture calculator of the mecablitz indicates the appro-
priate maximum flash range underneath the aperture value.
A minimum distance to the subject should be maintained to
avoid overexposure. The minimum distance is approx. 10 %
of the maximum flash range.