MMD Equipment 185S-5C2 part 1 - Manual (Page 11)

1.Safety
1-8
TR0304
W009
M003
TR0206

Be sure to stop the engine and remove the starter key
whenever the tension of the belt is to be adjusted.

Remove the negative (–) side cable from the battery.

If the machine is running, it might catch the operator’s hand
into the belts, and this could cause a serious injury.

Be sure to stop the engine and remove the starter key
whenever check or maintenance work is carried out near
the cooling fan.

If the cooling fan is rotating, it may catch the operator or part
of his body into the fan, and it could cause a serious injury.

When cleaning dust accumulated in such devices as the
air-filter, by blowing compressed air, wear safety glasses,
etc. to protect your eyes.

It is recommended to use a lamp with safety guard fitted
where the site is dark.
Operating the machine gropingly or by relying on one’s
intuition could cause unexpected accidents.

Any lamps without safety guard are not recommended since
they can be broken and they could ignite flammables such
as fuel, etc.
Adjusting tension of belt
Hands off from cooling fan
Cleaning by air-blow
Lighting apparatus