MMD Equipment 185S-5C2 part 1 - Manual (Page 16)

2.Part Names
2-2
No. Description Function
1 Speed regulator For adjusting engine speed in the system.
2 Engine For driving the compressor.
3 By-pass valve For keeping compressor oil at proper temperature.
4 Exhaust muffler Equipment which muffles an engine exhaust sound.
5 Radiator For cooling the coolant for engine because it is water-cooled.
6 Oil cooler For cooling compressor oil circulating in the system.
7 Fuel tank For storing diesel fuel oil.
8 Engine oil level gauge For checking engine oil level.(Right side of engine)
9 Coolant drain valve For draining engine coolant.
10 Air-end For compressing intake air.
11 Air filter(For compressor) For filtering the dust floating in the intake air.
12 Fuel
filter For filtering diesel fuel oil.
13
Solenoid valve for AUTO
IDLE mode
For reduction of power under unloaded operation
14 Engine oil filter For filtering engine oil
15 Air filter(For engine) For filtering the dust floating in the intake air.
16 Pressure control valve For keeping the receiver tank pressure higher than 58PSI in the tank.
17 Safety valve
For releasing compressed air to the atmosphere when the pressure rises
higher than the rated pressure.
18 Engine oil filler port For supplying and replenishing engine oil to engine.
19 Pressure regulator For regulating intake air volume.
20 Oil separator For separating oil mist mixed in compressed air.
21 Separator receiver tank For separating compressor oil from compressed air sent into the tank.
22 Compressor oil filler port For supplying and replenishing compressor oil.
23 Compressor oil level gauge For checking compressor oil level.
24 Compressor oil drain valve For draining compressor oil from separator receiver tank.
25 Engine oil level gauge For checking engine oil level.(Operation side)
26 Engine oil drain valve For draining engine oil for replacement of it and for maintenance.
27 Fuel tank drain valve
For draining condensate and water accumulated at the bottom of
the fuel tank.
28 Radiator drain valve For draining engine coolant at the bottom of radiator.
29 Oil cooler drain valve For draining compressor oil at the bottom of oil cooler.
30 Battery For electrically starting engine.
31 Sedimenter For separating water mixed in fuel oil.
32 Reserve tank For feeding engine coolant.
33 Electromagnetic pump
For air bleeding in fuel pipe system and also for fuel feeding to
engine.
34 Compressor oil filter For filtering compressor oil circulating in the system.