Montigo P42DF - Manual (Page 25)

Installing the Driftwood Log Set
Step 1. Remove the glass door as described in the
previous section.
LGS58
1 2 3 4 5 6
Step 3. Unpack the logs and handle with care.
Step 2. Ensure selected media is installed per
instruction as per Figures 24 - 24f or 25 - 25a.
Step 4. Place Log 3 from LGS58 in the back right corner
of the burner tray. Ensure log does not cover ports.
Place Log 2 of LGS58 on top of log 3.See Figure 25b.
Step 5. Place Log 5 from LGS58 on top of Log 2. Place
Log 1 from LGS58 on top of log 2, see f igure 25c
2
1
5
LGS59
1 2 3 4 5 6
The P42DF* has the option of installing a drift wood log set. Once the
firestones or speckled stones have been installed the log set can be
installed.
Ensure logs are securely placed and will not tip or fall. Remove media
where logs touch the burner tray to ensure a more secure position.
Lean the logs against the back panels. NO LOGS SHOULD LAY ACROSS
OR OVER TOP OF THE BURNER PORTS ON THE SURFACE OF
THE BURNER.
Figure 26.
Figure 26a.
Ports
Figure 26b.
Ports
Pilot
Step 6. Place log 6 of LGS59 across of log 1 of LGS58,
see figure 25e.
Figure 26c.
Figure 26d.
6
Figure 26e.
Ports
Ports
Page 25
P42DF* Indoor Gas Fireplace
XG0195 -150204.2
Installation