Opticom IP Installer User Manual
Page 11
IP Installer User's Manual
O1401-00
11
Opticom Technologies Inc.
After the program is started, the main window of IP Installer program will be appear on the screen as shown
below. There is no network device shown since it is the first time to run the program and nothing has been
registered.
Search Product
Scan the network and show the list of all the Opticom products that
IP Installer program found.
Clear Product List
Clear the Opticom products list created by searching the network.
Automatic IP Setup
Configure the network setting of selected IP device in Automatic mode.
Manual IP Setup
Configure the network setting of selected IP device in Manual mode.
Connect Product
Homepage
Connect to the server homepage of the selected IP device.
Update Firmware
Update the firmware of the selected IP device.
Filter Configuration
Define the range of MAC and IP addresses to search.