Opticom IP Installer User Manual
Page 24
IP Installer User's Manual
O1401-00
24
Opticom Technologies Inc.
The first six HEX characters are already filled with 00:30:6F, which is MAC prefix for our products. Put a
checkmark MAC Address or IP Range to set the range for searching.
You can set the range of IP addresses to scan as shown below. In this example, all the IP devices having MAC
address starting with 00:30:6F will be listed on the result window after scanning.
Or you can look for a single IP device having a specific IP address as below.
IP Address range for searching can be entered as follows.
You may even set both MAC Address and IP Range together at the same time.
After setting the searching range as explained above, click OK button. Then IP Installer program window will show