Opticom IP Installer - Manual (Page 22)

IP Installer User's Manual
O1401-00 22 Opticom Technologies Inc.
You may find the Password field is empty on the window shown above. If so, click the Password field of the IP
device and enter the proper password for the device. You are not allowed to update the firmware if the correct
password is not provided.
After the password is entered, the Start Update button will be enabled now. Click the button to see the following
window for selecting the firmware files.
Locate the firmware files on the hard drive and click OK button. The firmware updating will start.
You can also select multiple IP devices at the same time, and have them start firmware updating in a single step.
Select the files to update by using CTRL key as below.