Opticom IP Installer - Manual (Page 20)

IP Installer User's Manual
O1401-00 20 Opticom Technologies Inc.
3.6. Using PPPoE
If your network environment is based on PPPoE connection, you’ll need to choose PPPoE on IP Type selection.
First open the Network Setup window either by Manual IP Setup or Automatic IP Setup procedure. Choose
PPPoE in IP Type selection, then all the fields in Network setup area on the window will be disabled. The network
settings such as IP Address, Netmask, Default Gateway, DNS are no longer available to enter. You only need to
enter the Server Name, HTTP Port number, and login authentication for your PPPoE connection.
Note: In PPPoE mode, Wireless configuration is not available.