Dolby Laboratories Multichannel Audio Tool DP570 - Manual (Page 84)

68 Dolby ® DP570 Multichannel Audio Tool User’s Manual
Configuring a Monitor System
A.3.10 Calibrating Emulator Output
If your DP570 does not include the Cat. No. 548 Analog Output Card, calibrate your
speaker system using the emulator outputs and external equipment. These outputs are
digital and do not have any internal adjustments.
A.4 Assigning a Dim Setting
The Dim Gain slider sets an alternate level for all speaker outputs. This level is activated
when you click the Dim button shown in
Figure A‐10 . This setting enables you to change
your monitor level in one click (for instance, if a client walks in or you have to take a phone
call), then return to your master level setting by clicking Dim again. If the Dim Gain setting
is Off, clicking Dim mutes the speakers.
Figure A‐10
Figure A-10 Dim Button
Note: You can also activate the Dim level via the GPI/O interface but not via the
front‐panel buttons.