Seaward Supernova Elite - Manual (Page 49)

How to view Test Results
39
How to perform Manual Tests
Manual mode provides the user with direct access to the tests. In
this mode individual tests can be selected and performed. Appliance
number, site, location, user can still be assigned to appliances if it is
required to store the result.
Entering Manual Mode
Use the Fast key to select Manual Mode from the Main Menu.
Note
To store tests in memory from Manual mode you must first
select Create Appliance No., perform the tests required for
the EUT. When you have completed the required tests select
Enter Comments/Save Results, upon leaving this option the
Tester will now store the results. Note that Enter Comments
option is not displayed until there is something to store.
The manual tests and other options available are shown in the table
below: -
Press the appropriate key to select a test or option.
----------MANUAL TEST SELECTION--------------
A..CREATE APPLIANCE NO.
S..CHANGE 230V/115V OP SOCKET
1..VISUAL CHECK
2..EARTH BOND TEST
3..INSULATION TEST
4..SUB LEAKAGE TEST
5..FLASH TEST
6..LEAKAGE TEST
7..TOUCH LEAKAGE TEST
8..POLARITY TEST
9..RCD
C.ENTER COMMENTS & STORE RESULTS
How to view Test Results