Seaward Supernova Elite - Manual (Page 64)

How to print Barcode Labels and Testcodes
54
How to use Setup
To set up the Tester, use the cursor keys to highlight the Setup option
on the Main Menu and press Enter to display the following menu: -
From this menu you can change the way the Tester will operate and
also change User levels and Sites. Use the cursor keys to highlight a
function and press Enter to select the desired option.
Edit Test Settings
This allows the user to add, modify, remove or confirm test settings
that can then be selected during automatic testing.
Use the cursor keys to highlight a Test Setting and press Enter to
enter the TEST SETTING EDITOR.
------------------SETUP------------------
EDIT TEST SETTINGS
EDIT USER LIST / OPTIONS
EDIT SITE LIST
EDIT LOCATION LIST
EDIT PHONE BOOK LIST
CHANGE DATE/TIME
SET LANGUAGE
SYSTEM CONFIGURATION
CHANGE PASSWORD
SET BRIGHTNESS
FACTORY SETTINGS
SELECT TEST SETTING
A. 230V HH / PORT 1
B. 230V HH / PORT 2
C. IT EQUIPMENT 1
D. IT EQUIPMENT 2
E. 230V MOV / STAT 1
How to print Barcode Labels and Testcodes