Seaward Supernova Elite - Manual (Page 54)

How to view Test Results
44
Note
When the connection icon is flashing you cannot change any
settings. The settings cannot be changed for a test if you
have performed that test from within an appliance sequence.
For example after selecting Create Appliance No you can
only change the Earth Bond settings on the first Earth Bond
test, all subsequent Earth Bond test will conform to the same
settings.
Press the Enter button to start the test.
Press the Red button to abort the test at any time.
Note
In manual mode you will not get Abort Options, the test will
simply stop the test and revert to the Meter display. The
aborted test will not be stored.
If an Appliance Number has been created, the test result will be
stored under the entered Appliance number. To store tests to
memory select COMMENTS / SAVE RESULTS from the MANUAL
TEST SELECTION screen
How to view Test Results