Seaward Supernova Elite - Manual (Page 78)

How to print Barcode Labels and Testcodes
68
Once the PERFORM MEMORY TEST option is highlighted press the
enter button.
The memory test checks all of the appliance results against their
checksums. If the test passes then no action is taken. If the test fails
then the Memory checksum requires updating. Use the cursor keys
and press Enter to choose an action if corrupted tests are found.
Note
The memory checksum is the sum of all of the memory
excluding display data, registers and deleted tests.
Delete Single Appliance
Enter the Appliance number to delete a single appliance and press
Enter.
A warning ‘Are You Sure?’ prompt will appear. Press the No Fast key
to return to the previous menu or press the Yes Fast key to perform
the delete operation and return to the previous menu.
Note
Deleting Appliances in this way will delete all of the matched
appliances across all Sites and Locations.
When a single appliance is deleted it is not removed from
memory but hidden from the user. This test is still resident in
memory and is taking up memory space, this test can be
reviewed / downloaded at a later date. Since the test is still
resident in memory the View Memory Capacity indicates
there are results stored. In this situation to remove all
resident tests select clear results memory.
---DELETE SINGLE APPLIANCE--
-
How to print Barcode Labels and Testcodes