Seaward Supernova Elite - Manual (Page 75)

How to print Barcode Labels and Testcodes
65
COMENTS LINE 1 – 4
These options allow the User to designate each Comment line as a
specific field for use with PATGuard Plus software. Options are:
ASSET DESCRIPTION, ASSET GROUP, MAKE, MODEL, SERIAL
NUMBER, NOTES.
These should be set to correspond to the settings in PATGuard Plus.
Default is COMENTS LINE 1 – ASSET DESCRIPTION,
COMENTS LINE 2 – NOTES,
COMENTS LINE 3 – NOTES,
COMENTS LINE 4 – NOTES.
These correspond with the default settings in PATSLite and
PATGuard Plus software
AFTER TEST
The options set here determine the next action after all the test
results are saved to memory. Options are:
OPTIONS – Displays the OPTIONS menu giving the User further
choices.
NEW TEST – Will display the ENTER APPLIANCE DETAILS screen
to immediately commence the next test.
DOWNLOAD, NEW TEST – Will Download the test results with out
further prompting and display the ENTER APPLIANCE DETAILS
screen to immediately commence the next test. When this option is
chosen a further option is required to CONFIGURE the Download.
Default is OPTIONS.
ROLL PRINTER
This allows the user to define the roll printer to be used with the
Supernova Elite. For barcode printing with the Seaward Thermal
Printer (283A954) set to SEAWARD (283A954).
DATE AND TIME
This allows the user to password protect the date and time. An
existing password must be setup before this option will become
effective.
USER LIST
This allows the user to password protect the USER LIST. An existing
password must be setup before this option will become effective.
How to print Barcode Labels and Testcodes