Sim2 Crystal - Manual (Page 10)

10 Important safety instructions
Remote control
1. POWER ON/OFF
Single button for POWER ON and POWER
OFF the projector.
"Turning the projector on" on page 19 , "Turning
the projector off" on page 34
2. Source selection keys (COMP, VIDEO, S-
VIDEO, HDMI1, HDMI2, PC)
Selects an input source for display.
"Selecting an input source" on page 20
3. Aspect keys (ANA, 4:3, LB, WIDE, REAL)
Selects the display aspect ratio.
"Selecting the aspect ratio" on page 30
4. PRESET MODE
Sequentially selects a predefined picture
setting available for each input.
"Selecting a preset mode" on page 23
5. MEMORY keys (USER 1, USER 2, USER 3,
and DEFAULT)
Restores picture settings for the current
input source.
"Setting the User 1/User 2/User 3 mode" on
page 24
6. ENTER
Enacts the selected On-Screen Display
(OSD) menu item.
7. Arrow/Keystone keys (Left / , Up /
, Right / , Down / )
Moves the current On-Screen Display
(OSD) menu selection in the direction of
the arrow being pressed when the OSD
menu is activated.
Manually corrects distorted pictures
resulting from an angled projection.
"Using the menus" on page 21 , "Correcting
picture distortion" on page 22
8. MENU
Toggles the On-Screen Display (OSD)
menu on and off.
"Using the menus" on page 21
9. EXIT
Goes back to previous OSD menus, exits
and saves any changes made using the
On-Screen Display (OSD) menu.
"Using the menus" on page 21
10.Picture quality adjustment keys
(BRIGHTNESS, CONTRAST, COLOR, TINT)
Displays the setting bars for adjustment of
the appropriate picture quality values.
"Fine-tuning the picture quality" on page 25
11.Picture window control keys (PIP, SIZE,
POSITION, ACTIVE)
Displays the Picture In Picture (PIP)
windows, toggles between the main
window and sub-window with ACTIVE,
and adjusts the size and position of the
currently active window with SIZE and
POSITION.
"Displaying more than one image source
simultaneously" on page 32
12.TEST
Displays the test pattern.
"Test Pattern" on page 40
13.INFO
Displays the Information menu.
"Information menu" on page 40
14.LIGHT
Turns on the remote control backlight for
about 10 seconds. Pressing any other key
while the backlight is on keeps the
backlight on for a further 10 seconds. Press
the key again to turn the backlight off.
1
2
3
4
5
7
6
9
12
14
8
10
11
13